The two main aspects to think about when using Windows as a client for a console connection via the mini-USB cable are determining which COM port to connect to, and which terminal emulation software to use.A free alternative, and arguably simpler to use, is PuTTY, which shall be described below.The Device Manager will display a tree of devices on your PC.Open Ports (COM LPT) and you may see some ports already (what you will see depends on your PCs configuration).
Cisco Usb Console Cable Software To UseThen, plug in the USB console cable and additional ports will appear. Kimi no na wa mp4uploadIt could be COM4 and COM5, specifically Silicon Labs Dual CP210x USB to UART Bridge: Standard COM Port (COM4), and the same for COM5. The PuTTY Configuration window will appear, defaulting to SSH settings. Select the Serial radio button and the fields will change to show a Serial line field and a Speed field. The Serial line field will have a default value, typically, of COM1. You will need to change that to one of the COM ports that appeared when you were looking at the Device Manager as described above, e.g. COM4. The Speed value should stay at the default of 9600. If there is no prompt, try again with a different COM port value, COM5 say. Weve installed the appropriate drivers and the device is recognised on the COM6 and the COM7 port. The parameters that we have used are: Baud Rate - 9600, Data bits - 8, Parity - none, Stop bits - 1, Flow control - none.
0 Comments
Leave a Reply. |
AuthorKelsey ArchivesCategories |